Product Description
1. Solar Barn Light with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system powered
Solar Energy and battery.
2. The range between the light and Remote control can be up to 100m.
3. One Remote Control can be linked to up to Four Groups Batten Lights, Each Group can up to 256 Lights.
4. Batten Lights can be combined into a lighting system with up to FOUR Groups connected to one Remote Control and operated via a single
Remote Control Pad.
5. Bright Powerful 30W lighting supplied by 120 LED SMT2835 with adjustable brightness 8% to 100% via the Remote Controller.It can last
50 hours at 8% brightness
6. Extended and Improved 18V 30W Solar Panel with High Energy Conversion rate to charge full the battery in 5-6h in sunny weather conditions.
7. Detached Solar Panel design with 3m extension cord allows keeping the panel outdoor at the direct sunlight while the light can be used at shaded
locations or indoor.
8. The light can be operated with Remote pad or manually switch.
9. Suitable for outdoor and indoor use including daytime operation.
10.Durable Body made of Aluminium combined with industrial-grade pc. enhanced heatproof and weather resistance.
11.Easy to install, setup and operate. Completely safe. Charging protection and discharging protection.
12. No maintenance cost. User-friendly design, no wiring or any professional installation needed.
Detailed Photos
Product Parameters
Charging Indicator Light
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt ( >11.5V)
Yellow LED = Medium Volt (11.5-10.5V)
Red LED = Low Volt (<10.5V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
·On/Off Switch- Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.
Easy to Use
Syncing the Remote Control to the Solar Light
Before using the remote control for the first time, you will need to connect the light to the remote control.
 |
1.How to Program a new remote Control: Press and Hold the Group ON "I" Button of the remote Light flashes 3 times, code matching is successful. 2.HoW to Remove all programming of remote control: Press and Hold the Master On "I" Button, then turn on the code has been cleared. |
Remote Control Usage
* Use the Master Buttons to turn all lights On and Off Together.
* Use the Group Buttons to turn on individual lights. This is useful when there are multiple lights and grouping is required.
* Press and Hold the Dimmer+/Dimmer-. All lights can be dimmed together.
Application scenarios
